Water reducing multi dosage / plasticiser to produce flowable concretes. Chloride free. Description
POZZOLITH 390 FG is a water reducing, plasticising admixture, for the production of low slump loss, high workability concrete.
POZZOLITH 390 FG represents the latest evolution in plasticiser technology as, formulated for use over a wide dosage range, POZZOLITH 390 FG can match the performance characteristics of many superplasticisers at lower dosage and cost.
At the lower end of the dosage range POZZOLITH 390 FG will substantially increase workability of a given water cement ratio. Alternatively, the water cement ratio can be reduced whilst maintaining a given slump. The water reduction capability and extension of workability will increase with dosage. At higher dosage rates, POZZOLITH 390 FG will enable water reductions and the production of flowing concrete only previously available from superplasticisers.
Primary uses
POZZOLITH 390 FG is formulated for use by commercial ready-mix operators, who can benefit from its multiple role characteristics by minimising admixture stock.
Typical applications
- In areas of congested reinforcement where high workability will ease placement and compaction.
- Hot weather concreting where extension of workability is beneficial.
- To effect reductions in the water cement ratio enabling either higher strength or cement economy.
Standards
ASTM C-494 type A, and F.
Packaging
POZZOLITH 390 FG is supplied in 210ltr drums and bulk.
Compatibility
POZZOLITH 390 FG is compatible with all types of Portland cement including SRC and modified, Type ll. For use with other special cement types or blends contact your BASF representative for advice.
Strength
Used to reduce the water cement ratio, POZZOLITH 390 FG will improve all the desirable performance characteristics of hardened concrete: higher compressive strength and modulus; lower permeability, shrinkage and creep.
Dosage
The normal range is 0.3 - 1.0 ltr / 100 kg cement. Higher dosages may be required when certain combinations of materials and conditions are present or water reduction in excess of 15% is required.
In all cases, trial mixes should be carried out to determine the optimum dosage required to achieve the desired concrete property.
Dispensing
POZZOLITH 390 FG is introduced into the mixer with the mixing water. The admixture works more efficiently if it is added to the dampened mix after 50 - 70% of the water has been introduced. No extension to normal mixing time is necessary. POZZOLITH 390 FG should never be added to dry cement.
Storage
POZZOLITH 390 FG must be stored in a place where temperature does not drop below +5°C. If product has frozen, thaw at and agitate until completely reconstituted. Store under cover, out of direct sunlight and protect from extremes of temperature.
Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult BASF's Technical Services Department.
Safety precautions
POZZOLITH 390 FG is not a fire or health hazard. Spillages should be washed down immediately with cold water. For further information, refer to material safety data sheet.
Note
Field service, where provided, does not constitute supervisory responsibility. For additional information contact your local BASF representative.
BASF reserves the right to have the true cause of any difficulty determined by accepted test methods.