PCI CARRALIGHT  

Areas of application

·                     For indoor and outdoor use.

·                     For walls and floors.

·                     For weight-optimising laying of calibrated natural stone.

·                     On cement screeds, concrete and precast concrete elements, ground anhydrite and/or gypsum-based floated screeds, heated screeds, mastic asphalt, plasterboards, gypsum fibre boards, dry screeds, insulation boards, plaster slabs, plasters, aerated concrete and old wall and floor tiles.

·                     For adhesive bed thicknesses from 2 to 10 mm.

·                     Tile laying on the bonded waterproofing PCI Lastogum.

Laying of natural stone tiles on walls with PCI Carralight.

Features and benefits

·       Polymer modifie d, guarantees excellent adhesion even to non-absorbent natural stone such as granites or quartzites.

·       Low density, therefore weight-saving tiling.

·       Flexible, compensates tensions in the substrate and variations in temperature.

·       Rapid curing, walkable and groutable after approx. 6 hours and able to bear weight after approx. 1 day.

·       White colou r, no staining from the adhesive bed when laying very light-coloured natural stone tiles.

·       Good workability , therefore easy to apply.

·       Resistant to permanent water and frost, multi-purpose use indoors and out on walls and floors.

·       Corresponds to C2FT in accordance with DIN EN 12004. 05